Automatic Hand Sanitizer Dispensers

An automatic hand sanitizer dispenser is a sensor-activated hygiene unit that delivers a measured sanitizer dose without any surface contact, built for continuous use in commercial and institutional spaces.

Walk into any hospital, airport, or corporate office today, and the sanitizer unit near the entrance is no longer a courtesy, it's expected. If it's empty or missing, people notice. Euronics hand sanitizer dispensers are installed across Mall chains, corporate campuses, and healthcare facilities across India, built so that the gap never happens.

Types of Hand Sanitizer Dispensers

Spaces differ in layout, footfall, and power availability. One format doesn't cover everything.

• Wall-Mounted Sensor Dispensers Fixed at entry points, corridors, and washrooms. Keeps floors clear, integrates cleanly into the wall layout, and doesn't shift under repeated use. The standard specification for hospitals, offices, and airports.
• Battery-Operated Models: No wiring needed. Installs anywhere, including locations where electrical access is limited or expensive to add. Practical for retrofit projects and multi-floor deployments where running cables isn't feasible.

Euronics Hand Sanitizer Dispenser Models

1. EST83  Automatic Hand Sanitizer Dispenser Stainless steel body, 1000 ml capacity, infrared sensor with 8 cm sensing range. Runs on 4 x AA alkaline batteries. Compact dimensions at 135 x 93 x 241 mm, suited for countertop and mid-traffic installations. 6-month warranty.
2. EST80H  Auto Hand Sanitizer Dispenser (High Traffic) Built specifically for high-footfall environments. 700 ml capacity with a controlled 1 to 2 ml dispense volume per activation. Optimized for IPA soft gel formulations. 8 cm sensing range, 6 x AA alkaline battery operation. Designed for walls in busy corridors, hospital wings, and airport terminals. 6-month warranty.
3. EST82 Automatic Hand Sanitizer Dispenser: The largest capacity in the range at 1100 ml. Stainless steel construction, 5 to 15 cm sensing distance, and dimensions at 108 x 107 x 268 mm. For locations where refill frequency needs to stay low: large office floors, hotel entrances, and institutional washrooms. 6-month warranty.

Features of Hand Sanitizer Dispensers

• Touchless Infrared Sensor Operation: Hands go under, and sanitizer is released. No surface contact at any point. In a hospital OPD or airport terminal where a unit is activated hundreds of times daily, this isn't a convenience, but it's the hygiene baseline.
• Measured Dose Per Activation: Each trigger releases a fixed amount. No overuse, no spillage, no gel pooling on the floor. Across a multi-floor building, that consistency makes a real difference to consumption and refill cost over time.
• 304 Stainless Steel Body Used on the EST83 and EST82. Stainless handles the humidity, cleaning chemicals, and handling pressure of commercial washrooms without corroding or discolouring. It also holds its finish in premium lobbies and hotel entrances where the unit is visible.
• High Tank Capacity 1000 ml on the EST83, 1100 ml on the EST82. Fewer refill trips per shift for janitorial teams, fewer gaps in availability during peak hours  both matter in facilities managing hygiene across multiple floors.
• Battery-Operated, No Wiring Required All three models run on standard AA alkaline batteries. Install on any wall without electrical coordination. On retrofit projects, that removes a significant cost and scheduling dependency from the installation.

Automatic vs Manual Hand Sanitizer Dispensers

Installation and Maintenance

• 1. Select the model based on footfall and location. EST80H for high-traffic corridors and terminals.  EST82 for large floors needing low refill frequency. EST83 for countertop and mid-use locations. Installation

  2. Mark fixing points at correct height. Installation height is 15 to 18 cm from the counter surface across all three models. Consistent placement across floors improves user experience in multi-location deployments.
  3. Insert batteries and fill the tank. No electrical work needed. All models run on standard AA alkaline cells. Fill before commissioning and confirm sensor activation with a test pass.
  4. Test sensing range before handover. Sensing range varies by model  8 cm on the EST83 and EST80H, 5 to 15 cm on the EST82. Adjust placement if false activations occur near high-traffic foot movement.
  5. Sign off and log unit location. For multi-floor installations, logging unit positions simplifies refill rounds and service tracking for facility teams.
     
     
• Maintenance
  

1. Refill access is tool-free. Tank access is designed for quick top-up during routine janitorial rounds no disassembly, no specialist tools.
2. Nozzle cleaning takes seconds. Gel residue at the dispense point wipes off with a damp cloth. No specialist cleaning products needed.
3. Battery replacement is standard. AA alkaline swap across all models. Facility teams carry the same cell type for all three units.
4. Spare parts and service Pan-India. Euronics service covers Tier 2 and Tier 3 cities, not just metros.

Why Choose Euronics Hand Sanitizer Dispensers?

• 25+ years in commercial hygiene automation: Not a brand that entered this category during the 2020 sanitizer boom, but a specialist with real engineering and service depth built over two decades.
• In-house manufacturing, India's largest washroom automation facility: Warranty, spare parts, and service sit with the same company. Most competitors in this space are rebadged imports with no accountability after the sale.
• Installed at IGI Airport Terminal 3, Unity One Mall chains, hospitals, corporate campuses, and MNC offices across India. Environments that benchmark supplier performance over time. The units hold up.
• Tested by recognized agencies: Independent testing for sensor accuracy, dose consistency, and build quality. Documentation available for procurement and compliance teams.
• Warranty and AMC-backed: Standard 6-month warranty per model. AMC contracts are available for institutional accounts covering parts and labour.